Everyday tool

Square Footage Calculator

Enter a room’s length and width to calculate its area in square feet and square meters.

Runs in your browser. No upload.

Enter positive room dimensions. The waste allowance is optional.

Area (ft²)
—
Area (m²)
—
Area with waste (ft²)
—

About this tool

Square Footage Calculator made simple.

Choose feet, inches, meters or centimeters for both dimensions. The optional waste allowance is added to the area estimate; it is not a guarantee of the exact amount of material required.

Guide

Using Square Footage Calculator

Measure one side of a room, measure the other, and this page gives you the floor area. You can type the lengths in feet, inches, meters or centimeters. It returns the area in square feet and in square meters. A third box adds an extra margin, called a waste allowance, so you can see a larger figure that allows for cuts and mistakes. The page is meant for a single rectangular space, such as a bedroom, a deck or a patch of garden. It suits home owners, renters and people planning flooring, paint or a rug.

How to use it

  1. Measure the length and the width of the space with a tape measure. Use the same unit for both sides.
  2. Type the length and the width into their boxes, then pick the unit: ft, in, m or cm.
  3. Leave the waste allowance at 10 percent, or type your own number from 0 to 100. Clear the box to use none.
  4. Press Calculate. Three results appear: area in square feet, area in square meters, and area with waste in square feet.
  5. Use the plain area for paint or a rug size, and the area with waste when you shop for material that has to be cut.
  6. Press Clear to reset the boxes. This also sets the unit back to feet and the allowance back to 10.

Worked examples

A 12 by 10 foot bedroom

You enter
Length
12
Width
10
Unit
ft
Waste percent
10
You get
Area sq ft
120 ft²
Area sq m
11.148 m²
Area with waste
132 ft²

12 times 10 is 120. Ten percent of 120 is 12, so with the allowance you plan for 132 square feet.

Run through the tool’s own code.

A 4 by 3 meter living room

You enter
Length
4
Width
3
Unit
m
Waste percent
10
You get
Area sq ft
129.167 ft²
Area sq m
12 m²
Area with waste
142.084 ft²

4 times 3 is 12 square meters. The page changes that to square feet so you can read it either way. The allowance is added to the square feet figure.

Run through the tool’s own code.

Sides measured in inches

You enter
Length
144
Width
96
Unit
in
Waste percent
0
You get
Area sq ft
96 ft²
Area sq m
8.919 m²
Area with waste
96 ft²

144 inches is 12 feet and 96 inches is 8 feet, so the floor is 12 by 8, which is 96. With no allowance the last figure matches the first.

Run through the tool’s own code.

A small room in centimeters

You enter
Length
500
Width
400
Unit
cm
Waste percent
5
You get
Area sq ft
215.278 ft²
Area sq m
20 m²
Area with waste
226.042 ft²

500 cm by 400 cm is 5 meters by 4 meters, which makes 20 square meters. Five percent is added to the square feet total.

Run through the tool’s own code.

Decimal sides with a larger allowance

You enter
Length
15.5
Width
11.25
Unit
ft
Waste percent
15
You get
Area sq ft
174.375 ft²
Area sq m
16.2 m²
Area with waste
200.531 ft²

Decimals are fine. The allowance is 15 percent of 174.375, which is about 26.16, and that brings the total to just over 200.5 square feet.

Run through the tool’s own code.

A zero side is refused

You enter
Length
0
Width
10
Unit
ft
Waste percent
10
You get
Error
Length and width must be greater than zero.

An area needs two real sides. Enter a number above zero in both boxes.

Run through the tool’s own code.

When it helps

  • Find out how many square feet of flooring a bedroom or hallway needs before you visit a shop.
  • Compare room sizes on two rental listings when one gives meters and the other gives feet.
  • Estimate the area of a wall, a deck or a garden bed to size paint, stain or mulch.
  • Pick a rug that covers most of a room by checking the floor area first.
  • Work out the size of a room for a heating or cooling quote when the seller asks for square feet.
  • Check a home plan that lists the sides but not the total area.

Limits to keep in mind

  • It works for one rectangle only. For an L shaped room, calculate each rectangle on its own and add the results by hand.
  • Both sides use the same unit. You cannot enter one side in feet and the other in inches.
  • Length and width must be above zero, and the waste allowance must stay between 0 and 100 percent.
  • The allowance is shown only in square feet. There is no square meter figure that includes it.
  • Results are rounded to three decimal places on screen.
  • The tool measures area, not quantity. It does not know box sizes, tile sizes or paint coverage, so it cannot say how many packs to buy.

Tips

  • Measure each side twice. If the two readings differ, measure a third time before you type anything in.
  • For an L shaped room, split it into two rectangles in your head, run the tool twice, and add the two answers.
  • Round up the final figure to the next whole pack size that the shop sells.
  • Ask the seller or installer what allowance they suggest for your material and layout, and type that number in.
  • Use the square meter result when you are reading a plan from a country that uses the metric system.

Common questions

About Square Footage Calculator.

How do I calculate square footage from length and width?

Put both measurements in the same unit and multiply them. A room 12 feet long and 10 feet wide has 120 square feet. This page does the multiplication and the unit change for you.

How do I calculate square footage if I measured in inches?

Choose in as the unit and type the two sides. The page works out the area in square inches behind the scenes and shows it in square feet. As a rule, 144 square inches make one square foot.

How many square meters are in a square foot?

One square foot is about 0.0929 square meters. Instead of doing that sum, you can read the square meters box, which the page fills for you at the same time as the square feet.

What is the waste allowance for?

Flooring and similar materials have to be cut around walls and corners, and some pieces are spoiled. The allowance adds a percentage on top of the measured area. It is a planning margin, not an exact amount.

How much extra flooring should I add?

The page starts at 10 percent, but that is only a starting value. The right number depends on the material and the layout, so follow the advice on the product label or from the installer.

Can I use it for a wall instead of a floor?

Yes, as long as the wall is a rectangle. Enter the height as one side and the width as the other. The labels say room, but the sum is the same. Subtract doors and windows by hand.

What if my room is not a rectangle?

Break the room into rectangles, calculate each one, and add the areas. This tool has no shape options, so it cannot handle triangles, curves or angled walls by itself.

Why is the square meter answer rounded?

The page shows up to three decimal places, so a value such as 11.1483648 is shown as 11.148. The small difference does not matter for buying material.

Can I leave the waste box empty?

Yes. If the box is empty, the page treats it as zero percent, and the area with waste matches the plain area. The Clear button puts the value back to 10.

Does the page save my measurements?

No. The sums run inside your browser and the numbers are not sent to any server, so you can try as many measurements as you like.

How much extra flooring should I include for waste?

Add a waste allowance based on your project or flooring guidance. The estimate adds that percentage to the measured area; it does not determine the exact amount to buy.