Everyday tool

QR Code Generator

Paste a link or short message and download a clean QR code locally.

Runs in your browser. No upload.

Always black and white for reliable scanning.

Generated locally in your browser. Nothing is uploaded.

About this tool

QR Code Generator made simple.

The code is generated on your device. Nothing is uploaded, and the result can be downloaded as a PNG image.

Guide

Using QR Code Generator

This page turns a web link or a short line of text into a QR code picture that you can save as a PNG file. You type or paste your text, pick a picture size of 256, 384 or 512 pixels, and press the button. The code is always black on white and has a blank border around it. The picture is drawn on your own device and your text is not sent to a server. It suits posters, table signs, handouts and labels. It makes one plain kind of code for text up to 106 bytes. It does not count scans, edit a code later, or add logos or colors.

How to use it

  1. Click the box called Link or short text and type or paste your web address or message. Write a full address that begins with https:// if you want people to land on a web page.
  2. Choose a picture size from the Size list: 256, 384 or 512 pixels. The middle one, 384, is already selected. Pick the largest one if you plan to print.
  3. Press Generate QR code. The code appears below and the status line says it is ready. Nothing is uploaded at this step.
  4. Look at the code and scan it with a phone before you share it. Check that the phone opens the right page or shows the right words.
  5. Press Download PNG to save the picture. The file is named usefulverse-qr-code.png. If you have not pressed Generate yet, this button makes the code first.
  6. Press Clear to empty the box and hide the code, then start a new one.

Worked examples

A short web address

You enter
Text
https://example.com
Size
384 px
You get
Bytes
19
Qr version
2
Modules
25 x 25
Picture
384 x 384 px

The text is 19 bytes, which is too long for the smallest code (17 bytes at most) but fits version 2. A decoder library read the same text back from the drawn code.

Run through the tool’s own code.

A very short word

You enter
Text
HELLO
Size
256 px
You get
Bytes
5
Qr version
1
Modules
21 x 21
Picture
256 x 256 px

Version 1 is the smallest code this page makes. It holds up to 17 bytes, so a short word leaves plenty of room. A decoder library read HELLO back from it.

Run through the tool’s own code.

A longer address with a query

You enter
Text
https://example.com/a/very/long/path?with=query&and=more&params=1234567890&x=yz
You get
Bytes
79
Qr version
5
Modules
37 x 37

Seventy-nine bytes is one more than version 4 can hold (78), so the page moves up to version 5. More modules means each square is smaller at the same picture size, which is harder to scan.

Run through the tool’s own code.

Accented letters use more bytes

You enter
Text
Café
You get
Letters
4
Bytes
5
Qr version
1

The letter é takes two bytes, so four letters cost five bytes. This is why a text with many accents reaches the 106-byte limit sooner than the same number of plain letters.

Run through the tool’s own code.

Too many bytes for the limit

You enter
Text
the letter ü typed 54 times
You get
Status
Use 106 bytes or fewer. Short links work best.

Fifty-four letters of ü are 108 bytes, so the page refuses it even though the box accepts 106 characters. The picture is hidden and a message tells you the text is too long.

Run through the tool’s own code.

An empty box

You enter
Text
three spaces
You get
Status
Paste a link or short text first.

Spaces at the start and end are trimmed, so a box with only spaces counts as empty. The page stops and puts the cursor back in the box.

Run through the tool’s own code.

When it helps

  • Put a QR code on a menu card or table sign so guests can open the full menu page on their phones.
  • Print a code on a flyer or poster that leads to a sign-up form, a map, or a ticket page.
  • Add a code to a product label or manual that points to a help page with longer instructions.
  • Give students a handout with a code that opens the class page instead of making them type a long address.
  • Share a short plain message, such as a room number or a code word, in a form that a phone camera can read.
  • Make a quick code for a one-off event, then keep the PNG with your event files.

Limits to keep in mind

  • The text can be at most 106 bytes, not 106 letters. Letters with accents take two bytes or more, so the real limit for such text is lower.
  • The page builds only the five smallest QR sizes, versions 1 to 5, which are 21 to 37 squares wide. Longer text cannot be made here.
  • The code uses error correction level L, the lowest of the four levels. The makers of QR Code describe it as suited to clean conditions, so a dirty, folded or scuffed print may fail.
  • Colors, logos and shapes cannot be changed. The code is always black on white, and the page offers only three picture sizes.
  • The code is fixed. It holds your text itself, so it cannot be edited, switched off, or tracked. If the address changes you must make a new code.
  • After an error message, the picture is hidden. Fix the text and press the button again. Always scan the code you plan to use before you print it.

Tips

  • Keep the text short. Fewer bytes give a smaller code with bigger squares, and bigger squares are easier for a phone to read.
  • Scan the code with two different phones, or two different scanner apps, from the final printed size before you print many copies.
  • Save the largest size, 512 pixels, if the code will be printed. Stretching a small picture makes the edges soft.
  • Leave the white border alone. Do not crop it off or put text or pictures against the edge of the code.
  • Type the address by hand and read it twice, or copy it from the browser bar. A single wrong letter makes a working code that goes to the wrong place.
  • Print the code on a plain light background. Avoid curved surfaces and shiny paper when you can.

Sources

Common questions

About QR Code Generator.

How do I make a QR code for a website link?

Paste the full web address into the box, choose a picture size, and press Generate QR code. Then press Download PNG to save the picture. Check it by scanning it with a phone before you print it or share it.

Does the QR code expire or can I change it later?

The code does not expire, because it holds your text directly and nothing is stored on a server. For the same reason you cannot edit it. If the address or message changes, make a new code and replace the old one.

Is my link or text uploaded anywhere?

No. The code is calculated and drawn by script on the page itself, and the status line says nothing left the browser. The PNG is made on your device too. Only the page files are loaded from the site.

Why is there a limit of 106 bytes?

The page builds only QR versions 1 to 5, and the biggest of them holds 106 bytes of text. Bytes are counted after the text is turned into UTF-8, so accented letters and symbols use more than one byte each.

Which picture size should I choose?

Choose 256 px for small screens, 384 px for general use, and 512 px for print. The page leaves a border of four squares on each side. For example, version 2 at 384 px gives squares of about 11.6 pixels, which is comfortable.

Why is the code only black and white?

High contrast helps cameras find the squares. The page keeps colors fixed so you cannot pick a low-contrast pair by mistake. The makers of QR Code also warn that decorated or altered codes may not be readable.

Can I put a logo in the middle of the code?

This page does not offer it, and it is risky with this code. A logo hides squares, and the code uses the lowest error correction level, which leaves little room to repair missing data. Test any edited code very carefully.

What is the white border for?

The border, often called the quiet zone, gives the scanner a clear edge to find the code. This page adds four squares of white on every side. The makers of QR Code state that a margin is required around the code.

How can I check that my code works?

Scan it from the screen with your phone camera and read what appears. Then print a test copy at the real size and scan that too. Try another phone if you can. Only a real scan shows whether the printed code is readable.

Is this the same as a QR code reader?

No. This page makes a code from text. A reader does the opposite: it takes a picture of a code and shows the text inside. UsefulVerse has a separate QR Code Reader tool for that job.

Should I use a short link or a long address?

A short address gives a simpler code that is easier to scan. If your link is long, use a short address on a domain you control that redirects to it. You can change where it points later, even though the code stays the same.

How do I create a QR code?

Paste a link or short text, choose an image size and select Generate QR code. You can then download the PNG.

Are the QR codes always black and white?

Yes. The generator uses black modules on a white background for reliable scanning.