Everyday tool

Average Calculator

Paste numbers separated by spaces, commas or new lines and calculate their average.

Runs in your browser. No upload.

Separate numbers with spaces, commas or new lines.

Average
—
Sum or weighted total
—
Count
—
Minimum
—
Maximum
—
Total weight
—

About this tool

Average Calculator made simple.

Calculate a weighted average for grades with different credits: scores 90 and 80 with weights 3 and 1 give 87.5. Switch to simple average for an arithmetic mean, or calculate the score needed on a final exam from your current grade, exam weight and target. The tool also shows the sum, count, minimum and maximum. Paste values or grades from a spreadsheet.

Guide

Using Average Calculator

The Average Calculator has three modes in one page. Simple average takes a pasted list of numbers and shows the mean with the sum, count, smallest and largest. Weighted average takes a list of values and a matching list of weights, which suits grades with different credits. The third mode finds the score you need on a final exam to reach a target grade. It gives the mean only. It does not show the median or the mode.

How to use it

  1. Pick a mode with the buttons at the top: Simple average, Weighted average for grades, or What grade do I need on my final.
  2. For a simple average, paste or type your numbers into the box. Separate them with spaces, commas, semicolons or new lines, then press Calculate average. A lone number with thousands commas, such as 1,000, counts as one number.
  3. For a weighted average, put the values in the first box and the weights in the second, in the same order and with the same count. Then press Calculate weighted average.
  4. For the final exam mode, enter your current grade, the weight of the final as a percent, and the grade you want in the course. Then press Calculate required grade.
  5. Read the results below. Depending on the mode you see the average, the sum or weighted total, the count, the lowest and highest value, and the total weight.
  6. Press Clear to empty every box in all three modes.

Worked examples

Five test scores

You enter
Mode
simple
Numbers
85 90 78 92 88
You get
Average
86.6
Sum
433
Count
5
Min
78
Max
92

The scores add up to 433. Dividing 433 by 5 gives 86.6.

Run through the tool’s own code.

Numbers that include a negative

You enter
Mode
simple
Numbers
-5, 5, 10
You get
Average
3.333333
Sum
10
Count
3
Min
-5
Max
10

The sum is 10 and there are 3 numbers, so the mean is 3.333333 after rounding to six places.

Run through the tool’s own code.

Two grades with weights 3 and 1

You enter
Mode
weighted
Values
90, 80
Weights
3, 1
You get
Average
87.5
Weighted total
350
Total weight
4
Count
2

90 times 3 is 270 and 80 times 1 is 80, which gives 350. Dividing by the total weight of 4 gives 87.5.

Run through the tool’s own code.

Weights given as percents

You enter
Mode
weighted
Values
88, 76, 95
Weights
40, 35, 25
You get
Average
85.55
Weighted total
8,555
Total weight
100

The products are 3,520, 2,660 and 2,375. They sum to 8,555, and with weights that total 100 the average is 85.55.

Run through the tool’s own code.

A target that is within reach

You enter
Mode
final
Current grade
82
Final weight
20
Target grade
85
You get
Required final
97%

Coursework counts for 80 percent, so 82 gives 65.6 points. You need 19.4 more points from a 20 percent exam, which means a score of 97.

Run through the tool’s own code.

A target that is out of reach

You enter
Mode
final
Current grade
70
Final weight
30
Target grade
80
You get
Required final
103.333333%

Coursework gives 49 points and the exam can add at most 30. The tool shows 103.333333 percent, and the page notes that a result over 100 percent cannot be reached.

Run through the tool’s own code.

When it helps

  • Find the mean of a set of test scores, sales figures or daily measurements.
  • Work out a course grade when assignments, quizzes and exams have different weights.
  • Combine grades with different credit values, as in a grade point style average.
  • Check how much of a final exam you need to pass a course or hit a target.
  • Paste a column from a spreadsheet to get the sum, count and range at the same time.
  • Check a quick mean for a school project or a lab report.

Limits to keep in mind

  • It only gives the mean. There is no median, mode or standard deviation here. The Standard Deviation Calculator is a separate tool.
  • In weighted mode the number of values must equal the number of weights, and no weight may be negative. The total weight must be greater than zero.
  • A thousands comma counts only in a number set apart by spaces, new lines or semicolons, such as 1,000 or 12,345.6. In 1,000,2,500 the commas still split it into 1, 0, 2 and 500. This holds for pages that write decimals with a point.
  • The final exam mode needs both grades from 0 to 100 and a final weight above 0, up to 100. Anything outside gives an error.
  • The final exam mode assumes your current grade covers all the coursework before the final. A result above 100 percent means the target cannot be reached.
  • Results are rounded to at most 6 decimal places for display. Any grade rounding set by your school is not applied.

Tips

  • Paste a single column from a spreadsheet. New lines are accepted as separators, so you do not need to add commas.
  • For weights, use the credit hours or the percent of the grade. Weights do not have to add up to 100.
  • A weight of 0 is allowed. That value is counted in the list but adds nothing to the weighted average.
  • If your teacher says the final is worth 25 percent, type 25, not 0.25.
  • Check the Count line after you press the button, to make sure that every number was read.
  • To see how one extra score changes the mean, run the list twice, once with it and once without.

Sources

UsefulVerse guides

All guides

Common questions

About Average Calculator.

How do I calculate the average of a list of numbers?

Choose Simple average, paste the numbers into the box and press Calculate average. The tool adds them up and divides by how many there are. It also shows the sum, the count and the smallest and largest value.

What separators can I use between numbers?

Spaces, commas, semicolons and new lines all work. You can paste a column or a row from a spreadsheet. A number such as 1,000 or 12,345.6 is read as one number when it stands alone between spaces, new lines or semicolons. Short items like 1,2,3 are still three numbers. A comma right after a thousands number, as in "1,000, 2,500", splits it again, so separate such numbers with a space, a new line or a semicolon.

How is a weighted average calculated?

Each value is multiplied by its weight, and those products are added up. That total is divided by the sum of the weights. For 90 and 80 with weights 3 and 1, the answer is 350 divided by 4, which is 87.5.

What should I use as weights for grades?

Use the credits for each course, or the percent each assignment counts for. Both give the same kind of result because only the relative size of the weights matters, not whether they add up to 100.

How does the final exam mode work?

It treats your current grade as the result of the coursework that is not the final. It then finds what score on the final makes the full course equal your target, using the weight of the exam you typed.

What does it mean if the required grade is above 100?

It means the target cannot be reached even with a perfect score on the final. The tool still shows the number so you can see how far off it is. Try a lower target or ask your teacher about extra credit.

Why do I get an error for my weighted lists?

Most often the two lists have a different number of items, a weight is negative, or one entry is not a number. Make both lists the same length and check each line for stray text.

Is the average the same as the median?

No. The average, or mean, is the sum divided by the count. The median is the middle value of a sorted list. A single very large number pulls the mean up but barely moves the median. This tool shows only the mean.

Does the tool keep or send my data?

No. All the math happens inside your browser and nothing is uploaded or stored by the page. You do not need an account, and Clear removes what you typed.

When should I not trust the result?

Be careful when your school or employer uses its own rounding, drops the lowest score or caps a grade. This tool does none of that, so confirm the official rule before you act on a final-grade estimate.

How do I calculate a weighted average for grades?

Enter each grade and its matching credit or weight in the same order. For example, (90 × 3 + 80 × 1) ÷ (3 + 1) = 87.5.

What is the difference between weighted and simple average?

A simple average treats every value equally. A weighted average gives values with larger weights more influence—for example, a 3-credit grade counts three times as much as a 1-credit grade.

What is the average of 10, 12 and 14?

Add the values (10 + 12 + 14 = 36), then divide by 3. The arithmetic mean is 12.

Can I paste a column of grades or measurements?

Yes. Paste values separated by commas, spaces or line breaks. Use the weighted mode for matching grade and credit lists; the tool does not calculate a median.

What grade do I need on my final exam?

Enter your current course grade, the final exam weight and your target grade. For example, with an 80% current grade, a 40% final and an 85% target, you need 92.5% on the final.